interface | HD35-AP-W-E

521,00 EUR

inkl. 19 % USt -> Preis zzgl. Versandkosten

Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!

Art.Nr.: HD35-AP-W-E

Produktbeschreibung

base unit, USB output, Wi-Fi and Ethernet interface

general information:

The device is acting as an interface between the network data loggers that are positioned in the measurement sites and the PC. It receives the data that are aquired by the data loggers via wireless connection and communicates with the PC via the USB output, the GSM connection or the Ethernet or WIFI local network. The installation of USB drivers is not required.
Power supply by the external 6 V DC power supply. Internal backup battery. If the PC is not connected, the internal memory allows the storage of the measurement data received from the data loggers (the memory is managed in circular mode: when the memory is full, the oldest data are overwritten by the new ones). Acoustic alarm with internal buzzer. Configuration via HD35-AP-S software. Installation with fixed or removable wall mount (supplied mount or optional flanges).

software HD35-AP-S included

specifications:

frequency of transmitting:	868 MHz
antenna:	whip antenna
transmitting range:	p.r.t table
serial outputs:	USB with Mini USB type connector (cable CP23)
ethernet connection:	permits (if the Internet connection is available) the sending of an alarm via e-mail and the sending of the recorded data via e-mail or to an FTP address, allows the MODBUS TCP/IP protocol
Wi Fi connection:	permits (if the Internet connection is available) the sending of an alarm via e-mail and the sending of the recorded data via e-mail or to an FTP address, allows the MODBUS TCP/IP protocol
internal storage:	the number of samples that can be stored depends on the type of data loggers connected, the capacity is 226,700 samples if all the data loggers record 7 measured quantities
LED indicators:	external power supply connected, battery charge level, status of radio connection
working temperature:	-10°C to +60°C
relative working humidity:	0 % to 85 % r.h., non-condensing
power supply:	internal, rechargeable 3.7 V lithium ion battery, capacity 2,250 mA/h, 3-pole JST connector
power consumption:	160 mA with Ethernet, 275 mA with Wi-Fi
battery autonomy (typical):	11 hours with Ethernet, 8 hours with Wi-Fi