measuring set for pH | SET-GMH 5530
772,00 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit i.d. Regel ca. 0-4 Arbeitstage für Standardausführung
Art.Nr.: SET-GMH5530Produktbeschreibung
SET-GMH 5530 consisting of:
- waterproof measuring device for pH, ORP, temperature GMH 5530 with silicone protective cove
- pH electrode GE135-L02
- 3x buffer solution (PHL 4, PHL 7, PHL 10)
- KCl electrolyte KCL3M
- pepsin cleaning solution GRL 100
- case GKK 2021
- battery
- calibration protocol
- instruction manuals
general information:
With this ready-to-use measuring set for pH you have everything you need for your application in a practical case. Furthermore with the set price you save 23 % compared to the price of the single components
With this ready-to-use measuring set for pH you have everything you need for your application in a practical case. Furthermore with the set price you save 23 % compared to the price of the single components
- GLP features (good laboratory practice)
- large dual display with background illumination
- high resolution (0.001 pH / 0.1 mV)
- incl. calibration protocol
applications:
No matter in which sector you are working, our comprehensive SET-GMH 5530 never leaves you out in the rain and is, due to the practical case, always tidy.
- measurements in water bodies, fish keeping, aqua farming
- monitoring of drinking water and processes, soil measurements
- food production and monitoring
- laboratory: Medicine, pharmaceutics, chemistry
- quality management
| measuring ranges: | pH: -2.000 pH to 16.000 pH (resolution selectable) redox/mV: -2,000.0 mV to +2,000.0 mV (resolution selectable) (based on hydrogen system DIN38404: -1,792 mVH to +2,207 mVH) temperature: -5.0°C to +150.0°C; +23.0°F to +302.0°F rH: 0.0 rH to 70.0 rH |
| accuracy: | pH: ±0.005 pH redox/mV: ±0.05 % FS (mV or mVH) temperature: ±0.2°C (in the range -5.0°C to +100.0°C) rH: ±0.1 rH |
| connections: | pH, redox: BNC socket, compatible to standard BNC-plugs and waterproof BNC-plugs, additional banana jack (4 mm) for separate reference electrode, input resistance: 1012 Ohm temperature: 2 banana jacks (4 mm) for temperature probes (Pt1000 or NTC 10K) interface/supply: 4-pole bajonet connector for serial interface and supply (with accessory USB 5100) |
| operating conditions: | -25°C to +50°C; 0 % to 95 % r.h. (non-condensing) |
| display: | two 4 ½ digit 7-segment displays (15 mm and 12 mm) |
| pH calibration: | automatical: 1-, 2- or 3-point calibration, standard buffer or buffer acc. to DIN19266 (A, C, D, F, G) manual: 1-, 2- or 3-point calibration |
| power supply: | 2x AAA battery, power consumption: <1.0 mA |
| battery life: | 1,000 hours |
| housing: | impact resistant ABS housing with pop-up clip |
| ingress protection: | IP65 / IP67 |
| dimensions: | 160 x 86 x 37 mm (device incl. protective cover) 450 x 360 x 140 mm (Koffer) |
| weight: | 250 g (device incl. battery and protective cover) approx. 5,700 g (set) |
further functions:
status display for pH electrode and battery: bar graph display
background illumination: duration adjustable (off, 5 s to 2 min.)
automatic temperature compensation:
In operation mode „pH“ and with connected temperature probe an automatic temperature compensation (ATC) is possible in the range 0°C to +105°C. Without temperature probe a manual input of the temperature is possible.
pH calibration:
1-, 2- or 3- point calibration with characteristic curve for standard buffer, buffer according to DIN19266 (A, C, D, F, G) or manual buffer selection. The temperature dependency of the buffer is compensated automatically when the buffer detection is automatical.
1-, 2- or 3- point calibration with characteristic curve for standard buffer, buffer according to DIN19266 (A, C, D, F, G) or manual buffer selection. The temperature dependency of the buffer is compensated automatically when the buffer detection is automatical.
Permissible electrode data: asymmetry: ±55 mV / slope: 45 mV / pH to 62 mV / pH.
The condition of pH-Electrode is checked at each calibration.
The condition of pH-Electrode is checked at each calibration.
redox measurement (ORP):
There are two choices:
„mV“ standard redox or mV measurement
„mVH“ conversion to hydrogen system acc. to DIN38404 part 6
„mV“ standard redox or mV measurement
„mVH“ conversion to hydrogen system acc. to DIN38404 part 6
rH measurement:
Calculation of the rH value by means of a redox measurement and by manual entering of the pH-value.
calibration interval:
The device asks for a recalibration after a selectable time period (1 to 365 days or inactive).
The device asks for a recalibration after a selectable time period (1 to 365 days or inactive).
catalogue page of device GMH 5530 as .pdf:
instruction manual GMH 5530 as .pdf:
 |
Empfohlenes Zubehör | Weitere Artikel
 |
ISO-Kalibrierschein pH | WPP 9236,00 EUR |
|
ISO-Kalibrierschein pH | WPP 3155,00 EUR |
 |
KCl-Elektrolyt | KCL 3 M9,40 EUR |
 |
Pepsin-Reinigungslösung | GRL 10010,00 EUR |
 |
wasserdichtes pH- / Redox-Handmessgerät | GMH 5530378,00 EUR |
 |
Silikonschutzhülle | K 5031,50 EUR |
 |
Pufferlösung | GPH-DOS 423,60 EUR |
 |
Pufferlösung | GPH-DOS 723,60 EUR |
 |
Pufferlösung | GPH-DOS 1023,60 EUR |
 |
tauchbare pH-Elektrode (inkl. Pt1000-Sensor) | GE 135 BNC179,00 EUR |
 |
Steckernetzgerät | GNG 5/500093,10 EUR |