portable measuring instrument for indoor air quality monitoring | HD 37AB1347
639,00 EUR
inkl. 19 % USt -> Preis zzgl. Versandkosten
Lieferzeit bzw. Fertigungszeit variiert - bitte erfragen!
Art.Nr.: HD37AB1347Produktbeschreibung
general information:
HD37AB1347 IAQ Monitor is a Delta Ohm device for the analysis of air quality (Indoor Air Quality, IAQ).
The instrument measures several parameters simultaneously: carbon dioxide CO2, carbon monoxide CO, temperature, relative humidity, atmospheric pressure, furthermore calculation of dew point, wet bulb temperature, absolute humidity, mixing ratio, enthalpy. All this is done with the P37AB147 SICRAM probe. The SICRAM probe P37B147 measures all listed parameters except of carbon monoxide CO. Also combined temperature and humidity SICRAM probes, SICRAM hot wire probes and SICRAM vane probes for air speed measurements and temperature SICRAM probes can be connected to the instrument.
The instrument, according to a proper procedure, calculates the percentage of injection of outdoor air (% outside air) for both carbon dioxide CO2 and temperature and ventilation rate.
The HD37AB1347 data logger has a storage capacity of 67,600 presets for each of the two inputs divided into 64 blocks; it uses the software DeltaLog10 from version 0.1.5.0 for Windows® operating systems.
The instrument is equipped with a large dot matrix graphic display with a resolution of 160x160 points. The reference standards: ASHRAE 62.1-2004, decree law 81/2008. The rules apply to all enclosed spaces that may be occupied by people. Should be considered, depending on air quality, at the presence of chemical, physical and biological contaminants or at the appearance of unpurified air flows from the outside (ventilation rate).
application areas:
- measurement of IAQ (indoor air quality) and comfort conditions in schools, offices and indoor environments.
- analysis and study of the Sick Building Syndrome and of the consequences.
- verification of HVAC system.
- investigation of IAQ conditions in factories to optimize the microclimate and improve productivity.
- checking of building automation.
Probes and cables are NOT included in the scope of supply. Please order separately!
specifications:
| operating temperature: | -5°C to +50°C | |
| storage temperature: | -25°C to +65°C | |
| operating humidity: |
0 % to 85 % r.h. non-condensing | |
| ingress protection: | IP65 | |
| instrument uncertainty: |
± 1 digit at 20°C |
|
| power supply mains adapter (SWD10): |
12 V DC/1 A |
|
| power supply rechargeable batteries: |
four 1.2 V type AA batteries Ni-MH, autonomy : 20 hours with 1,800 mAh Ni-MH batteries | |
| power consumption when instrument is shut off: | <45 μA | |
| security of stored data: | unlimited | |
| inputs for probes with SICRAM module: |
two 8-pole DIN45326 plugs | |
| serial interface: |
socket: 8-pole M12, type: RS232C (EIA/TIA574) or USB 1.1 or 2.0 not insulated | |
| USB interface: | type: 1.2 or 2.0 not insulated, connection: MiniUSB B-type | |
| storage capacity: | 67,600 recordings for each of the 2 inputs | |
| logging interval: | selectable: 15, 30 s, 1, 2, 5, 10, 15, 20, 30 min und 1 h | |
| dimensions (l x w x h): | 185 x 90 x 40 mm | |
| weight: | 470 g (complete with batteries) | |
| display: | backlit, dot matrix 160 x 160 points, visible area 52 x 42 mm | |
For further details p.r.t. data sheet:
instruction manual as .pdf:
 |
Empfohlenes Zubehör | Weitere Artikel
 |
Netzgerät | SWD-1060,10 EUR |
 |
tragbarer Thermodrucker | HD-40-1360,00 EUR |
 |
9-polige Sub-D-Buchse | HD-2110-RS25,90 EUR |
 |
Thermopapier | RCT27,10 EUR |
|
Anschlusskabel | CP-2325,90 EUR |
|
Anschlussrohr-Set | HD-37-3634,20 EUR |
|
Anschlussrohr-Set | HD-37-3742,40 EUR |
|
33 % r.F. gesättigte Lösung | HD33111,90 EUR |
 |
Ersatzbatteriepack | BAT-4049,50 EUR |
|
75,4 % r.F. gesättigte Lösung | HD75111,90 EUR |
